| Yamaha Raptor 700 HP4 Valve Train Kit |
Part Number: DR-294K
Price: $995.00
Availability: CALL US!
|
|
Product Information:
With today's modern ATV 4-Stroke engines, making additional Horsepower is no easy task...This makes it critical that Engine Tuners have the Experience, Knowledge and Equipment to do the job properly.
Duncan Racing International's HP4 Valve Train Kit is designed to give you the utmost in performance and reliability by using the most advanced equipment and techniques in the industry. All porting work is performed by our master technician and valve seat cutting is done on our in-house SERDI valve grinding machine..
DRI HP4 PURCHASE OPTIONS
DR-294K $995.00 DRI Valve Train HP4 Kit Camshaft (see cam profile options below), HD Valve Springs w/Titanium Retainers, Shortened Valve Guides, Big Valve Kit (+1.0mm S/S Intake and Exhaust Valves) ONLY* Porting Serdi Valve seat cut not included.
Kit must be installed by a trained professional with proper equipment.
DR-294KP $1495.00 DRI Valve Train HP4 Kit Camshaft (see cam profile options below), HD Valve Springs w/Titanium Retainers, Shortened Valve Guides, Big Valve Kit (+1.0mm S/S Intake and Exhaust Valves), Cylinder Head Porting , SERDI Valve Seat Machining and Professional Head Assembly w/Porting, SERDI Valve Seat Cut and Assembly*
*Customer must send in head for modification or purchase new head from DRI for $492.50
CAMSHAFT OPTIONS
294-X11 Grind Camshaft
Stage 1 Lift: .420/.385", Duration 246°/244°
294-X22 Grind Camshaft
Stage 2 Lift: .4480/.445", Duration 264°/260°
*Shortened guides are required on X22 cams.
**HPValve spring required on all Raptor 700 cams
***To insure highest quality, all camshafts used by DRI are made in the USA.
VALVE OPTIONS
ADDITIONAL OPTIONS
Big Bore Kits and alternate compression ratio pistons are also available to use in conjunction with the HP4 Kit. Check the Big Bore Kit and Piston sections on our site for more info.
HP4 KIT FEATURES
In-House Cylinder Head Porting* (by Master Technician)
*Valve guides are removed during porting process to allow for greater port reconfiguration
Port Design Modifications Aided by In-House Flow Bench Testing and Computerized Port Mapping Software
Precision Valve Seat Machining and Reconfiguration*
*DRI uses in-house SERDI Valve Seat Cutting Machine used by F1, CART and NASCAR.
Big Valve Kits (Stainless Steel or Titanium)
Heavy Duty Valve Spring Kits*
*With Titanium Retainers, Mandatory with High Performance Valve Trains
AMPCO 45 Shortened Valve Guides
Camshafts of the Highest Quality Made in the USA
All Head Work Done In-House for Reasonable Turnaround Delivery Time.
Customers Can Send In Their Head for Modification or DRI Carries New OEM Heads.
HORSEPOWER
HP4 Kits with porting offer gains up to 5 HP*.
*Results vary depending on camshaft profile and piston compression.
PIPE and IGNITION
For maximum performance, it is highly recommended to use a Fat Boy 4 Complete Exhaust and Vortex Interceptor with all HP4 Kits.
IMPORTANT NOTE
When installing a high performance camshaft it is the responsibility of the engine assembler to check and confirm that the piston to valve clearance is adequate. Minimum clearance is .060" from valve to piston at peak lift.
Tolerances can and will vary from engine to engine. There is not substitute for checking that these tolerances are correct.
This is especially critical when mixing camshaft and pistons from different engine builders.
One of the correct and easiest ways of checking this is by using the "claying the piston dome" method.
Call DRI or consult a professional technician.
|
|
)
)