| Banshee 35mm PWK Carburetor Kit |
Part Number: K-CR35-BK
Price: $459.00
Availability: CALL US!
|
|
Product Information:
Purchase Options
Part # K-CR35-BK Keihin 35mm PWK Carburetor Kit with CR Throttle & Cable $429.00
Part # K-TH35-BK Keihin 35mm PWK Carburetor Kit with Cable for Thumb Throttle $414.00
All Carburetor Kits Are PreJetted by DRI
No company in the ATV industry has more carburation experience and offers better instructions and customer service than DRI
Optional Items
DRI SUPER FLOW Carburetor Mod $60.00 (each carb)
Part # K-JK02 Jet Kit $ 69.00
Part # DR-3534 MasterFlow Intake Manifold System $229.00
Part # PRV-350 PYRAMID Reed Valves
Part # PD-200 Pro Flow Air Cleaner Kit (K&N) $129.95
CARBURETOR INFORMATION
Models: Yamaha Banshee
Engine Modifications Recommended:
Work best with professionally ported cylinders.
If used with stock cylinder porting low RPM power will be lost, compression must be raised 10-20%.
Example: Install PowerHead with smaller domes
Power: Keihin 35mm PWK Carbs deliver very good horsepower gain, when used with the proper set up. They will make there best power between 1/2 and Full throttle. Gain can be up to 10%
Works best for High Speed applications, Drag racing, TT’s, Flat Tracks etc.
Optional Upgrade Modifications
DRI SUPER FLOW mod. Is a machining modification performed in house by DRI. Improved performance on all Keihin carburetors at all air speeds. Improved air flow efficiency.
Works well in all applications
Reed Cage & Intake Manifold Recommendations
Stock intake manifold should NOT be used.
Use DRI MasterFlow Intake manifold system (see in INTAKE COMPONENTS Section on this website)
Carburetors will perform BEST when used with PYRAMID REED VALVES
Air Box Requirements
Keihin 35mm PWK’s work best when used with stock airbox with Pro Flow Air Cleaner Flange and K&N Air Filter. (slight modification required to airbox and air boots, for install)
Lid Removed
DRI does not recommend using carburetors without airbox
All Banshee Keihin carburetors are supplied with installation instructions
Jet Kit Optional but recommended Jet Kit is built around settings DRI puts in Carburetors.
Kit is supplied with Richer and Leaner: Pilot Jets, Needles, Main Jets, in a polypro box.
Notes
Keihin 35mm PWK Carbs work best with PTR Banshee Pipes & Fat Boy Silencers. They will do very well with either the Midrange or High Rev Version
Information Required From Client To Properly PreJet Their Carburetors
List of all Engine Modifications(porting, bore size etc.)
Pipe & Silencer
Air Filter & Box. Lid On or Off
Note if any Electrical Mods have been made
Kicking Compression (measured with engine cold)
Fuel Type and OOctane-PreMix Brand/Ratio
Elevation
Temperature & Humidity
Type of Riding
Throttle of Choice. Thumb or Twist.
Weight of Rider
Skill Level Of Rider
|
|
)
)
)