Roll Design Honda TRX 250R No-Link Swingarm

Roll Design Honda TRX 250R No-Link Swingarm


Models: Honda TRX 250R 88-89
*Will fit 86-87 models if frame is modified for additional rear motor mount. And other OEM parts are purchased to fit swingarm.

Available in 18.0 (XC) max rider weight 200
Available in 17.5 (MX) max rider weight 180
Due to the adjustment in the motion ratio, each design has a limit on the rider weight that will allow it to perform properly. It is not advisable to go above these recommendations

Swingarm is a no link design. A special shock must be purchased to work with this swingarm.(at addition cost)

Will work with any TRX 250R frame that incorporates original stock top shock mount location

Air box relocation may be required

Roll Design is the Pioneer (over 15 years) in ATV Suspension. Do not be mislead by fakes and copies. Roll Design has more R & D and field testing in their products than ALL other companies combined

Roll Design Swingarm Features
Optional:Skidptate or Chain Slider mount. If chain slider is desired it must be purchased at additional cost ($95.00)

Powder coated finish:Standard colors-Red, Grey, Blue, Black
Some Candy colors are available at an additional cost.
Chrome plating available at additional cost

Rear Bearing Carrier: Uses stock OEM or equivalent

Precision honed rear carrier housing for proper bearing carrier fit

Formed 4130 Chromoly main rails. Tapered configuration for Maximum torsion and beam strength

Low drag long wearing chain roller

Supplied with front pivot needle bearing, rear carrier pinch bolts and shock bolt

Certified TIG welded joints to ensure maximum strength

Gull Wing(bent) design availably for various models, offers lighter weight, improved airbox clearance, improved rear caliper clearance

All Roll Design Swingarms allow for more travel. Travel will vary depending on shock design, tire size(ground clearance)

Swingarm is a no link design. A special shock must be purchased to work with this swingarm.
Call us for Availability!
Add To Cart